Specification
- Input Voltage: AC90V-240V 50-60Hz
- Power:700W
- Warm-up time: 3 minutes
- Fuel consumption: 300min / L
- Oil bottle volume: 1.2 liters
- DMX channel: 2CH (CH1 air volume , CH2 smoke)
- With wireless remote control function
- Machine size:30x22x30cm
- Package dimensions:30x25.5x28cm
- N.W:3.9KG
- G.W:4.6KG
Characteristics
1. The atomization effect is good. Using a new generation of heater technology, the atomized particles are finer and drier.
2. Safe. The heater is made of stainless steel and there is no safety problem with traditional machines that can melt aluminum.
3. Stable. Adopt imported chips, strong anti-interference.
4. Resistant to blockage. The atomizing pipe uses a 6mm large pipe, which is four times that of a conventional pipe. Suitable for long-term use in wine bars.
5. No oil automatic protection, will not damage the machine.
6. Very fuel-efficient. Due to sufficient atomization, the efficiency is high. The same smoke output, fuel consumption is only half of the traditional heater fog machine.
Oil free protection instructions
1. There is no oil in the oil pot. Within 5 minutes, the machine will detect no oil and the oil pump will stop working.
2. In the case of oil-free protection, the following three modes of operation can exit the oil-free protection state.
A. Turn off the power and turn it on again. Return to normal working condition.
B. Use the DMX console. Push the dmx first channel (assuming the machine address code is set to 1) to the 0 position and push the push rod to 255. The machine will exit the oil-free protection state and enter the normal working state.
C. Press and hold the "manual" button on the machine panel to pump oil. Oil can be pumped in about 20 seconds.
